Setup Guide

commands { level
| role role-name
Enter the keyword command then a privilege level for accounting of commands
executed at that privilege level or enter the keyword role then the role name for
accounting of commands executed by a user with that user role.
name | default Enter one of the following:
● For name, enter a user-defined name of a list of accounting methods.
● For default, the default accounting methods used.
start-stop Enter the keywords start-stop to send a “start accounting” notice at the
beginning of the requested event and a “stop accounting” notice at the end of
the event.
wait-start Enter the keywords wait-start to ensure that the TACACS+ security server
acknowledges the start notice before granting the user’s process request.
stop-only Enter the keywords stop-only to instruct the TACACS+ security server to send
a “stop record accounting” notice at the end of the requested user process.
tacacs+ Enter the keyword tacacs+ to use TACACS+ data for accounting. The Dell EMC
Networking OS currently only supports TACACS+ accounting.
Defaults none
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.5(0.0) Added support for roles on the Z9000, S6000, S4820T, S4810, and MXL
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.3.1.0 Introduced on the E-Series.
Usage
Information
In the example above, TACACS+ accounting is used to track all usage of EXEC command and commands
on privilege level 15.
Privilege level 15 is the default. If you want to track usage at privilege level 1 for example, use the aaa
accounting command 1 command.
Example
DellEMC(conf)# aaa accounting exec default start-stop tacacs+
DellEMC(conf)# aaa accounting command 15 default start-stop tacacs+
1398 Security