Release Notes
Table Of Contents
- Dell System S6000–ON 9.14(2.10) Release Notes
- Document Revision History
- Supported Hardware
- Supported Software
- New Dell Networking OS Version 9.14(2.10) Features
- Restrictions
- Changes to Default Behavior and CLI Syntax
- Upgrading the CPLD
- S6000–ON Upgrade Procedures: Overview
- Upgrading the CPLD
- Uninstalling Dell Networking OS from the S6000-ON
- Documentation Corrections
- Deferred Issues
- Fixed Issues
- Known Issues
- Support Resources
CPGC Memtest for rank 0 ..................... PASS
CPGC Memtest for rank 1 ..................... PASS
POST:
RTC Battery ok at last cold boot (0xb)
RTC date Tuesday 05/18/2021 22:20:38
POST SPD test ............................... PASS
POST Lower DRAM Memory test
SpeedStep enabled, Processor Bus Ratio=10, Vid=51
Short memory cell test
Perf cnt (curr/fixed): 24e32568/24e48b08
POST Lower DRAM Memory test ................. PASS
POST Lower DRAM ECC check ................... PASS
DxE POST
POST Upper DRAM Memory test
SpeedStep enabled, Processor Bus Ratio=10, Vid=51
Short memory cell test
Perf cnt (curr/fixed): ba0ec40/ba0ede8
POST Upper DRAM Memory test ................. PASS
POST Upper DRAM ECC check ................... PASS
POST PCIe test .............................. PASS
POST NVRAM check ............................ PASS
POST overall test results ................... PASS
POST SPD test ............................... PASS
POST Lower DRAM Memory test
SpeedStep enabled, Processor Bus Ratio=10, Vid=51
Short memory cell test
Perf cnt (curr/fixed): 24e4db50/24e640f0
POST Lower DRAM Memory test ................. PASS
POST Lower DRAM ECC check ................... PASS
DxE POST
POST Upper DRAM Memory test
SpeedStep enabled, Processor Bus Ratio=10, Vid=51
Short memory cell test
Perf cnt (curr/fixed): ba5bf38/ba5c0d8
POST Upper DRAM Memory test ................. PASS
POST Upper DRAM ECC check ................... PASS
POST PCIe test .............................. PASS
POST NVRAM check ............................ PASS
POST overall test results ................... PASS
5. After the installation completes, the system displays the following ONIE prompt:
ONIE:/ #
14