Deployment Guide

stack-unit stack-unit number slot slot-number port port-number portmode quad
The defaults ports are:
2,4,6,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,27,29,31
To display the Fan-out capability profile, use the following show command:
show system stack-unit stack-unit number quad-port-profile
Example of the
show Command
The following example shows the show system stack-unit stack-unit number quad-port-
profile command.
Dell#show system stack-unit 1 quad-port-profile
Configured fan out profile ports in stack-unit 1
Configured Activated
2 2
4 4
6 6
8 8
9 9
10 10
11 11
12 12
13 13
14 14
15 15
16 16
17 17
18 18
19 19
20 20
21 21
22 22
25 25
27 27
29 29
30 30
31 31
32 32
S6010-ON_1#show system stack-unit 1 quad-port-profile
Configured fan out profile ports in stack-unit 1
Configured Activated
2 2
4 4
6 6
8 8
9 9
10 10
11 11
12 12
13 13
14 14
15 15
16 16
17 17
18 18
19 19
20 20
21 21
22 22
23 23
24 24
26 26
28 28
30 30
32 32
You can only split the 40G ports in the top row (odd numbered ports) on a 16X40G module. If you configure 4X10G on a 40G
interface, the subsequent even numbered interface is removed and unavailable for use.
Interfaces
383