CLI Guide

N/A
stack-unit 2 N/A
N/A
stack-unit 3 Reboot by Software
11/02/2017-08:15
stack-unit 4 N/A
N/A
stack-unit 5 N/A
N/A
stack-unit 6 N/A
N/A
stack-unit 7 N/A
N/A
PE ID: 20
==========
stack-unit 0 N/A
N/A
stack-unit 1 Reboot by Software
11/02/2017-04:10
stack-unit 2 N/A
N/A
stack-unit 3 N/A
N/A
stack-unit 4 N/A
N/A
stack-unit 5 N/A
N/A
stack-unit 6 N/A
N/A
stack-unit 7 N/A N/A
show rpm
View the current status of the RPM.
C9000 Series
Syntax
show rpm [slot-id [brief] | all]
Parameters
slot-id (OPTIONAL) Enter the RPM slot-ID zero (0) or 1.
all (OPTIONAL) Enter the keyword all to view a table with information on all present
RPMs.
brief (OPTIONAL) Enter the keyword brief to view an abbreviated list of RPM
information.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
8.1.1.0 Introduced on the E-Series ExaScale.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Control and Monitoring 133