CLI Guide

0x4be93020 3700 370 10000 0.00% 0.00% 0.00% 0 l2ProcMwpAck
0x4bd6e020 5150 515 10000 0.00% 0.00% 0.00% 0 L2Agent
0x4bd55020 80 8 10000 0.00% 0.00% 0.00% 0 dsagt
0x4bd39020 0 0 0 0.00% 0.00% 0.00% 0 ifaDispatch
0x4bb4f020 10440 1044 10000 0.00% 0.17% 0.20% 0 ifagt_1
0x4baa8020 450 45 10000 0.00% 0.00% 0.00% 0 aclAgent
0x4ba74020 1740 174 10000 0.00% 0.00% 0.00% 0 sflPEAgt
0x4ba72020 680 68 10000 0.00% 0.00% 0.00% 0 count
0x4c679020 8620 862 10000 0.00% 0.00% 0.00% 0
Example: show
processes cpu
summary
Dell#show processes cpu summary
CPU utilization 5Sec 1Min 5Min
----------------- ------- ------- --------
CP 43% 42% 40%
RP 0% 0% 0%
show processes ipc
Display the IPC messaging used internally between Dell Networking OS processes.
C9000 Series
Syntax
show processes ipc [recv-stats | send-stats] [cp | rp | lp | pe {slot-id |
all}]
Parameters
recv-stats Enter the keyword recv-stats to display information on IPC receiver-side
messages.
send-stats Enter the keyword send-stats to display information on IPC sender-side
messages.
cp Enter the keyword cp to view IPC message statistics on the Control Processor
CPU.
rp Enter the keyword rp to view IPC message statistics on the Route Processor CPU.
lp slot-id Enter the slot ID of the line card for which you want to view IPC message
statistics. The range of switch slot IDs is from 0 to 11. Enter linecard all
to view IPC statistics for all line cards.
pe pe-id Enter the keyword pe to view IPC message statistics on the port extender
(PE) .The PE ID range is from 0 to 255.
NOTE: The pe option is only visible when the extended bridge feature is
enabled.
Defaults Display IPC message statistics on all switch CPUs: Control Processor, Route Processor, and line cards.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
120 Control and Monitoring