CLI Guide

show console lp
View the buffered boot-up log of a line card, Route Processor or Control Processor CPU, including background resets, calls, and
initialization, on the console.
C9000 Series
Syntax
show console {lp slot-id | rp | cp}
Parameters
lp slot-id Enter a line-card slot number to view the boot-up log of a line-card (LP) processor.
The range of the slot IDs is from 0 to 2.
rp Enter the rp keyword to view the boot-up log for the Route Processor CPU.
cp Enter the cp keyword to view the boot-up log for the Control Processor CPU.
Defaults none
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage
Information
CAUTION: Use this command only when you are working directly with a technical support
representative to troubleshoot a problem. Do not use this command unless a technical
support representative instructs you to do so.
show cpu-traffic-stats
View CPU traffic statistics.
C9000 Series
Syntax
show cpu-traffic-stats [cp | rp | linecard {slot-id | pe ]
Parameters
number Specify an interface number. The number of interfaces range from 1 to 1568.
all Enter the keyword all to display traffic statistics on all the interfaces.
cp Enter the keyword cp to display traffic statistics on the Control Processor CPU.
rp Enter the keyword rp to display traffic statistics on the Route Processor CPU.
pe Enter the keyword pe to display traffic statistics on the Port Extender.
Defaults Display CPU traffic statistics for all switch CPUs (Control Processor and Route Processor).
Command Modes EXEC
102 Control and Monitoring