White Papers

Command Modes EXEC Privilege
Command
History
Version Description
9.14(1.0) Introduced on the S4810 and S4820T.
9.14(0.0) Introduced on the S5048F–ON.
9.13(0.0) Introduced on the S3100 series, S3048–ON, S4048–ON, S4048T-ON, S5000,
S6000, S6000–ON, S6010–ON, S6100–ON, Z9100–ON, Z9500, C9010, MXL, and
FN-IOM.
Usage
Information
Dell EMC Networking OS supports MD5, SHA1, and SHA256.
Example
DellEMC# verified boot hash system-image A:
619A8C1B7A2BC9692A221E2151B9DA9E
verified startup-config
Enable hash validation for the startup configuration during system startup.
Syntax
verified startup-config
To disable hash validation for the startup configuration, use the no verified startup-config
command.
Defaults Not configured
Command Modes CONFIGURATION
Command
History
Version Description
9.14(1.0) Introduced on the S4810 and S4820T.
9.14(0.0) Introduced on the S5048F–ON.
9.13(0.0) Introduced on the S3100 series, S3048–ON, S4048–ON, S4048T-ON, S5000,
S6000, S6000–ON, S6010–ON, S6100–ON, Z9100–ON, Z9500, C9010, MXL, and
FN-IOM.
Example
DellEMC(config)# verified startup-config
verify
Validate the software image on the flash drive after the image has been transferred to the system, but before the image has
been installed.
Syntax
verify { md5 | sha256 }[ flash:// ] img-file [hash-value]
Parameters
md5 Enter the md5 keyword to use the MD5 message-digest algorithm.
sha256
Enter the sha256 keyword to use the SHA256 Secure Hash Algorithm
flash:// (Optional). Enter the flash:// keyword. The default is to use the flash drive. You
can just enter the image file name.
img-file Enter the name the Dell EMC Networking software image file to validate.
hash-value (Optional). Enter the relevant hash published on i-Support.
Defaults flash drive
86 File Management