White Papers

Example
(Summary)
Dell# show ip cam linecard 4 port-set 0 summary
Total Number of Routes in the CAM is 13
Total Number of Routes which can be entered in CAM is 131072
Prefix Len Current Use Initial Sz
---------- ----------- ----------
32 7 37994
31 0 1312
30 0 3932
29 0 1312
28 0 1312
27 0 1312
26 0 1312
25 0 1312
24 6 40610
23 0 3932
22 0 2622
21 0 2622
20 0 2622
19 0 2622
18 0 1312
17 0 1312
16 0 3932
15 0 1312
14 0 1312
13 0 1312
12 0 1312
11 0 1312
10 0 1312
9 0 1312
8 0 1312
7 0 1312
6 0 1312
5 0 1312
4 0 1312
3 0 1312
2 0 1312
1 0 1312
0 0 8
Dell#
show ip cam stack-unit
Display CAM entries for a port-pipe of a stack-unit on a S-Series or Z-Series switch.
Syntax
show ip cam stack-unit {stack-unit-number} [port-set {pipe-number} | vrf
vrf-name {ip-address mask [longer-prefixes [ecmp-group detail]]}| ecmp-
group {detail | member-info [detail [group-index index-number]]}| summary]
Parameters
stack-unit-
number
Enter the stack-unit ID. The unit ID range is from 0 to 11 for the S4810.
port-set pipe-
number
Enter the keyword port-set then the number of the stack unit’s port-pipe. The
unit ID range is from 0 to 0.
vrf vrf-name Enter the keyword vrf followed by the name of the VRF to display CAM entries
corresponding to that VRF.
network mask
[longer-prefixes
[ecmp-group
detail]]
(OPTIONAL) Enter the IP address and mask of a route to CAM entries for that
route only. You can enter one of the following keywords to filter results.
● Enter the keyword longer-prefixes to view routes with a common prefix.
● Enter the keyword ecmp-group detail to view the ECMP group index.
ecmp-group
{detail | member-
info [detail
(OPTIONAL) Enter the keyword ecmp-group then one of the following keywords
to filter results.
● Enter the keyword detail to view the ECMP group index.
IPv4 Routing 807