White Papers

show qos dcb-buffer-threshold
Displays the DCB buffer threshold assigned to a QoS policy.
Syntax
show qos dcb buffer-threshold {name}
Parameters
name Enter the name of the profile, which can be a string of up to 32 characters in
length.
Command Modes
EXEC
EXEC Privilege
Usage
Information
The following table describes the output fields displayed for the show command:
Field Description
Name Name of the DCB buffer threshold profile
Buffer threshold
parameters
Buffer size allocated for the PFC priority queue and the priority of the queue
Example
Dell# show qos dcb buffer-threshold
Name : test1
Buffer threshold parameters:
pfc priority 0 buffer-size 40
pfc priority 3 buffer-size 50
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.7(0.0) Introduced on the S6000-ON and Z9500.
9.3(0.0) Introduced on the S6000 platform.
dcb pfc-total-buffer-size
Configure the total buffer size for PFC in kilobytes.
Syntax
dcb pfc-total—buffer—size buffer-size
Parameters
buffer-size Enter a number in the range of 0 to 7787.
Default The default is 6592KB.
Command Modes CONFIGURATION mode
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.11(2.0P0) Default value is changed from 3088 KB to 2656 KB in the Z9100-ON and S6100-ON.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S6100.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048–ON.
Data Center Bridging (DCB) 513