White Papers

Table 3. Output fields of the show cam-usage command (continued)
Field Description
Available CAM Amount of CAM space that is free and remaining
to be allocated for ACLs
Example
DellEMC#show cam-usage
Stackunit|Portpipe| CAM Partition | Total CAM | Used CAM |Available CAM
=========|========|====================|===========|==========|==============
0 | 0 | IN-L2 ACL | 1024 | 0 | 1024
| | IN-L3 ACL | 1024 | 1 | 1023
| | IN-L3 FIB | 163840 | 16 | 163824
| | IN-L3 ECMP GRP | 512 | 0 | 512
| | IN-V6 ACL | 0 | 0 | 0
| | IN-NLB ACL | 0 | 0 | 0
| | IPMAC ACL | 0 | 0 | 0
| | OUT-L2 ACL | 206 | 9 | 197
| | OUT-L3 ACL | 102 | 9 | 93
| | OUT-V6 ACL | 102 | 4 | 98
Example (show
cam-usage
router)
DellEMC#show cam-usage router
Stackunit|Portpipe| CAM Partition | Total CAM | Used CAM |
Available CAM
========|========|=================|=============|=============|
==============
0 | 0
| IN-L3 ACL | 1024 | 1 | 1023
|
| IN-L3 ECMP GRP | 512 | 0 | 512
|
| IN-V6 ACL | 0 | 0 | 0
|
| IN-L3-MIRR ACL | 0 | 0 | 0
|
| IN-L3 FIB | 163840 | 15 | 163825
test cam-usage
Verify that enough CAM space is available for the IPv6 ACLs you have created.
S4810
Syntax
test cam-usage service-policy input input policy name stack-unit {number |
all}
Parameters
policy-map name Enter the name of the policy-map to verify. Maximum is 32 characters.
number Enter all to get information for all the stack-units or enter the stack-unit number
to get information for a specific stack-unit. The range is from 0 to 11 for S4810.
Defaults none
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
466 Content Addressable Memory (CAM)