Setup Guide

Table Of Contents

• offset: (OPTIONAL) Enter the number of minutes to add during the summer-time period. The range is from 1 to1440. The

default is 60 minutes.

The following example shows the clock summer-time recurring command.

DellEMC(conf)#clock summer-time pacific recurring Mar 14 2009 00:00 Nov 7 2009 00:00 ?

DellEMC(conf)#02:02:13: %RPM0-P:CP %CLOCK-6-TIME CHANGE: Summertime configuration changed from

"none" to "Summer time starts 00:00:00 Pacific Sat Mar 14 2009;Summer time ends 00:00:00

pacific

Sat Nov 7 2009"

NOTE: If you enter <CR> after entering the recurring command parameter, and you have already set a one-time

daylight saving time/date, the system uses that time and date as the recurring setting.

The following example shows the clock summer-time recurring parameters.

DellEMC(conf)#clock summer-time pacific recurring ?

<1-4> Week number to start

first Week number to start

last Week number to start

<cr>

DellEMC(conf)#clock summer-time pacific recurring

DellEMC(conf)#02:10:57: %RPM0-P:CP %CLOCK-6-TIME CHANGE: Summertime configuration changed from

"Summer time starts 00:00:00 Pacific Tue Mar 14 2017 ; Summer time ends 00:00:00 pacific Tue

Nov

7 2017" to "Summer time starts 02:00:00 Pacific Tue Mar 14 2017;Summer time ends 02:00:00

pacific

Tue Nov 7 2017"

864

System Time and Date