Release Notes

Num Ports : 128
Up Time : 3 min, 24 sec
Dell Networking OS Version : 9.14(2.10)
Jumbo Capable : yes
POE Capable : no
FIPS Mode : disabled
Boot Flash : 3.1.1.7
Boot Selector : 3.1.0.3
Memory Size : 3203911680 bytes
Temperature : 37C
Voltage : ok
Serial Number : NA
Part Number : 08YWFG Rev A00
Vendor Id : DL
Date Code : 05182021
Country Code : CN
Piece Part ID : CN-08YWFG-28298-398-0104
PPID Revision : A00
Service Tag : BX71VS1
Expr Svc Code : 259 518 346 57
Auto Reboot : enabled
Burned In MAC : 90:b1:1c:f4:9c:c0
No Of MACs : 3
-- Power Supplies --
Unit Bay Status Type FanStatus FanSpeed(rpm)
---------------------------------------------------------------------------
0 0 up AC up 10368
0 1 absent absent 0
-- Fan Status --
Unit Bay TrayStatus Fan0 Speed Fan1 Speed
------------------------------------------------------------------------------------
0 0 up up 10031 up 10031
0 1 up up 10031 up 10031
0 2 up up 10134 up 10134
Speed in RPM
SMARTSCRIPTS
To uninstall and install new SMARTSCRIPTS packages after upgrading to Dell Networking OS, refer to the Open Automation
Guide.
Upgrading the CPLD
The S6000 system with Dell Networking OS Version 9.14(2.10) requires System CPLD revision 10, Master CPLD revision 12, and
Slave CPLD revision 10.
Verify that a CPLD upgrade is required
NOTE:
If your CPLD revisions are higher than the ones shown here, DO NOT make any changes. If you have questions
regarding the CPLD revision, contact technical support.
Use the following command to identify the CPLD version:
Dell#show revision
-- Stack unit 0 --
S6000 SYSTEM CPLD : 10
S6000 MASTER CPLD : 12
S6000 SLAVE CPLD : 10
7