Release Notes
Table Of Contents
- Dell System S6000 9.14(2.10) Release Notes
- Document Revision History
- New Dell Networking OS Version 9.14(2.10) Features
- Changes to Default Behavior and CLI Syntax
- Restrictions
- Supported Hardware
- S6000 Upgrade Procedures: Overview
- VLT Upgrade Procedure
- Documentation Corrections
- Deferred Issues
- Fixed Issues
- Known Issues
- Support Resources
show boot system stack-unit [0–5 | all]
Dell#show boot system stack-unit all
Current system image information in the system:
===========================================================
Type Boot Type A B
-----------------------------------------------------------
stack-unit 0 FLASH BOOT 9.14(2.10)[boot] 9.14(2.9)
stack-unit 1 is not present.
stack-unit 2 is not present.
stack-unit 3 is not present.
stack-unit 4 is not present.
stack-unit 5 is not present.
5. Upgrade the S6000 Boot Flash and Boot Selector images.
EXEC Privilege Mode
upgrade boot [all | bootflash-image | bootselector-image] stack-unit [0-5 | all] [booted
| flash: | ftp: | scp: | tftp: | usbflash:]
Dell Networking OS version 9.14(2.10) requires S6000 Boot Flash image version 3.1.1.7 and Boot Selector image version
3.1.0.3. The Boot Flash and Boot Selector images can be upgraded together by selecting all in the command. If the user
wishes to upgrade Boot Flash image or Boot Selector image separately, the options bootflash-image or bootselector-image
needs to be given separately in the command. The booted option is used to upgrade the Boot flash and Boot Selector images
to the image versions packed with the loaded Dell Networking OS image. The Boot Flash and Boot Selector image versions
packed with the loaded Dell Networking OS can be found using the show os-version command in EXEC PRIVILEGE mode.
NOTE:
The Boot Flash version packed in Dell Networking OS 9.14(2.10) for S6000 system is 3.1.1.7. Upgrade of Boot
Flash to version 3.1.1.7 is not mandatory for proper functioning of the system.
Dell#upgrade boot bootflash-image stack-unit 0 ftp:
Address or name of remote host []: 10.16.127.35
Destination file name []: FTOS-SI-9.14.2.10.bin
User name to login remote host: ftpuser
Password to login remote host:
Current Boot information in the system:
================================================================
Card BootFlash Current Version New Version
----------------------------------------------------------------
Unit0 Boot Flash 3.1.1.4 3.1.1.7
***********************************************************************
* Warning - Upgrading boot flash is inherently risky and should only *
* be attempted when necessary. A failure at this upgrade may cause *
* a board RMA. Proceed with caution ! *
***********************************************************************
Proceed upgrade Boot Flash image for stack-unit 0 [yes/no]: yes
!!!!!!!!!
Bootflash image upgrade for stack-unit 0 completed successfully.
Dell#upgrade boot bootselector-image stack-unit 0 ftp:
Current Boot information in the system:
==============================================================
Card BootSelector Current Version New Version
--------------------------------------------------------------
Unit0 Boot Selector 3.1.0.3 3.1.0.3
***********************************************************************
* Warning - Upgrading boot selectors is inherently risky and should *
* only be attempted when necessary. A failure at this upgrade may *
* cause a board RMA. Proceed with caution ! *
***********************************************************************
Proceed upgrade Boot Selector image for stack-unit 0 [yes/no]: yes
5