API Guide

• For a PE Gigabit Ethernet interface, enter the keyword peGigE then the pe-id/
stack-unit/ port-id information.
• For a port extender 10-Gigabit Ethernet interface, enter the keyword peTenGigE
then the pe-id / stack-unit / port-id information. The pe-id range is from 0 to 255;
the stack-unit unit-number range is from 0 to 7; and the port-id range is 25 to 28 or
49 to 52 depending on the PE.
in Display information of L2 ingress access-list configured to an interface.
out Display information of L2 egress access-list configured to an interface.
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.13.0.1P1 Introduced peTenGigE interface support on the C9010.
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
8.4.1.0 Introduced.
Usage information
This command displays ingress or egress L2 access-list information based on a given option.
If no ingress or egress access-list is attached to an interface, no information displays and you return to the DELL#
prompt.
Example
Dell#show mac access-lists in
Standard mac access list m1
seq 5 permit 11:22:33:44:55:66 count (0 packets)
Standard mac access list m2
seq 5 deny any order 2
seq 10 permit 00:33:00:11:00:77 33:44:55:66:77:88 count (0 packets)
Extended mac access list m3
seq 5 permit host 11:11:11:11:11:11 host 22:22:22:22:22:22 snap eq 600
Dell#
Dell#show mac access-lists out
Standard mac access list m1
seq 5 permit 11:22:33:44:55:66 count (0 packets)
Standard mac access list m2
seq 5 deny any order 2
seq 10 permit 00:33:00:11:00:77 33:44:55:66:77:88 count (0 packets)
show mac accounting access-list
This command displays ACL Mac accounting information.
C9000 Series
Syntax
show mac accounting access-list {acl_name} {interface | cam_count}
Access Control Lists (ACL) 257