API Guide

Usage Information When an ACL VLAN group name or the access-list name contains more than 30 characters, the name is
truncated in the show show acl-vlan-group group-name command output.
Examples The following example displays the output of the show acl-vlan-group command.
NOTE: Some group names and some access list names are truncated.
Dell#show acl-vlan-group
Group Name Egress IP Acl Vlan Members
TestGroupSeventeenTwenty SpecialAccessOnlyExperts 100,200,300
CustomerNumberIdentifica AnyEmployeeCustomerEleve 2-10,99
HostGroup Group5 1,1000
The following sample output shows the line-by-line style display when using the show acl-vlan-group
detail option.
NOTE: No group or access list names are truncated
Dell#show acl-vlan-group detail
Group Name :
TestGroupSeventeenTwenty
Egress IP Acl :
SpecialAccessOnlyExpertsAllowed
Vlan Members :
100,200,300
Group Name :
CustomerNumberIdentificationEleven
Egress IP Acl :
AnyEmployeeCustomerElevenGrantedAccess
Vlan Members :
2-10,99
Group Name :
HostGroup
Egress IP Acl :
Group5
Vlan Members :
1,1000
show cam-acl-vlan
Display the number of FP blocks of CAM that are allocated for different ACL VLAN services, including ACL VLAN optimization, VLAN
iSCSI counters, and Open Flow.
C9000 Series
Syntax
show cam-acl-vlan
Command Modes EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.0) Introduced on the Z9500.
9.3(0.0) Introduced on the S4810, S4820T, Z9000 and MXL.
Usage Information After you allocate FP blocks of CAM to ACL VLAN operation, you must reboot the switch to enable ACL VLAN
optimization.
The following table describes the output fields of the show cam-acl-vlan command:
252 Access Control Lists (ACL)