API Guide

member vlan (ACL VLAN Group)
Add VLAN members to an ACL VLAN group.
C9000 Series
Syntax
member vlan {VLAN-range}
Parameters
VLAN-range
Enter the member VLANs using comma-separated VLAN IDs, a range of VLAN IDs, a
single VLAN ID, or a combination. For example:
Comma-separated: 3, 4, 6
Range: 5-10
Combination: 3, 4, 5-10, 8
Default None
Command Modes ACL-VLAN-GROUP CONFIGURATION (conf-acl-vl-grp)
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.0) Introduced on the Z9500.
9.3(0.0) Introduced on the S4810, S4820T, and Z9000.
Usage Information At a maximum, there can be only 32 VLAN members in all ACL VLAN groups. A VLAN can belong to only one ACL
VLAN group at a time.
You can create an ACL VLAN group and attach the ACL with the VLAN members. The optimization is applicable
only when you create an ACL VLAN group. If you apply an ACL separately on the VLAN interface, each ACL has a
mapping with the VLAN and increased CAM space utilization occurs.
Attaching an ACL individually to VLAN interfaces is similar to the behavior of ACL-VLAN mapping storage in CAM
prior to the implementation of the ACL VLAN group functionality.
show acl-vlan-group
Display the configured ACL VLAN groups on the switch.
C9000 Series
Syntax
show acl-vlan-group {group-name | detail}
Parameters
group-name Display the configuration of an ACL VLAN group.
detail
Display information about all configured ACL VLAN groups in a line-by-line format.
Default No default behavior or values
Command Modes
EXEC
EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.0) Introduced on the Z9500.
9.3(0.0) Introduced on the S4810, S4820T, Z9000 and MXL.
Access Control Lists (ACL) 251