Users Guide

Example (If
atleast one port
is configured)
DellEMC(conf)# interface range twentyFiveGigE 1/10 - 1/25, fortyGigE
1/49/1, twentyFiveGigE 1/27 - 1/32
% Warning: Non-existing ports (not configured) are ignored by
interface-range
DellEMC(conf)# interface range fortyGigE 1/49/1 - 1/50/1, HundredGigE
1/51, fortyGigE 1/52/1
% Warning: Non-existing ports (not configured) are ignored by
interface-range
Example (If
no ports are
configured within
the specified
interface range)
DellEMC(conf)# interface range twentyFiveGigE 1/10 - 1/25, fortyGigE
1/49/1, twentyFiveGigE 1/27 - 1/32
% Error: No port is configured in interface range
DellEMC(conf)# interface range fortyGigE 1/49/1 - 1/50/1, HundredGigE
1/51, fortyGigE 1/52/1
% Error: No port is configured in interface range
Example
(Configuration
Terminal Batch
Mode)
DellEMC(conf-b)#interface range te 1/1-4
DellEMC(conf-if-range-te-1/1-4)#
Example
(Multiple Ports)
DellEMC(conf)# interface range twentyFiveGigE 1/1 - 1/12, twentyFiveGigE
1/3 - 1/9
DellEMC(conf-if-range-tf-1/1-1/12)#
Example
(Overlapping
Ports)
DellEMC(conf)# interface range twentyFiveGigE 1/1 - 1/10, twentyFiveGigE
1/1 - 1/20
DellEMC(conf-if-range-tf-1/1-1/20)#
Usage
Information
Only VLAN and port-channel interfaces created using the interface vlan and interface port-
channel commands can be used in the interface range command.
Use the show running-config command to display the VLAN and port-channel interfaces. VLAN
or port-channel interfaces that are not displayed in the show running-config command cannot be
used with the bulk configuration feature of the interface range command. You cannot create virtual
interfaces (VLAN, Port-channel) using the interface range command.
NOTE: If a range has VLAN, physical and port-channel interfaces, only commands related to physical
interfaces can be bulk configured. To configure commands specific to VLAN and port-channel only
those respective interfaces should be configured in a particular range.
Example (Single
Range)
This example shows a single range bulk configuration.
DellEMC(config)# interface range twentyFiveGigE 1/1 - 1/7
DellEMC(config-if-range-tf-1/1-1/7)# no shutdown
Example
(Multiple Range)
This example shows how to use commas to add different interface types to a range of interfaces.
DellEMC(config-if)# interface range twentyFiveGigE 1/1 - 1/20,
hundredGigE 1/49 - 1/53
DellEMC(config-if-range-tf-1/1-1/20,hu-1/49-1/53)# no shutdown
Example
(Multiple Range)
This example shows how to use commas to add VLAN and port-channel interfaces to the range.
DellEMC(config-if)# interface range twentyFiveGigE 1/1 - 1/20,
twentyFiveGigE 1/23 –1/24,
Vlan 2–100, Port 1–25
DellEMC(config-if-range-tf-1/1-1/20,tf-1/23-1/24,vl-2-100,po-1-25)# no
678 Interfaces