Release Notes
Table Of Contents
- Dell EMC S5048F–ON System Release Notes, OS Version 9.14(2.10)
- Document Revision History
- Requirements
- New Dell EMC Networking OS Version 9.14(2.10) Features
- Restrictions
- Changes to Default Behavior and CLI Syntax
- Documentation Corrections
- Deferred Issues
- Fixed Issues
- Known Issues
- Upgrading the ONIE Package for the S5048F-ON System
- Upgrading the DIAG Package for the S5048F-ON System
- Installing Dell EMC Networking OS on the S5048F-ON using ONIE
- Upgrading the CPLD
- Upgrading the SmartFusion Microcontroller Subsystem — SMF MSS-IAP
- Upgrading the SmartFusion Microcontroller Subsystem — SMF MSS-FPGA
- Upgrading the OOB-FPGA
- Upgrading the S5048F-ON Dell EMC Networking OS Image using Dell EMC Networking OS CLI
- Upgrade the Boot Selector and Boot Flash Images from Dell EMC Networking OS
- Uninstalling the Dell EMC Networking OS
- Installing a Third Party Operating System
- Support Resources
Requirements
The following requirements apply to the S5048F-ON system.
Hardware Requirements
The following lists the Dell EMC S5048F-ON system hardware requirements:
● 1/10/25/40/50/100 GbE switch
●
Forty-eight 1 GbE/10 GbE/25 GbE SFP28 ports
● Six 100 GbE QSFP28 ports (Each 100 GbE port can be fanned-out into 1x40 GbE, 2x50 GbE, 4x25 GbE, and 4x10 GbE)
● One MicroUSB-B console port
● One RJ-45 serial console port
● One USB Type-A port for more file storage
● On-board Rangeley central processing unit (CPU) system with 8GB DDR III RAM, 16GB iSLC mSATA SSD
● One 10/100/1000BaseT Ethernet management port
● Two hot-swappable redundant power supplies
● Four hot-swappable fan modules
● Standard 1U switch
The following lists the individual Dell EMC S5048F-ON system hardware components that are available to order:
● Fan with airflow from I/O side to PSU side
● Fan with airflow from PSU side to I/O side
● AC or DC power supply with airflow from I/O side to PSU side
● AC or DC power supply with airflow from PSU side to I/O side
NOTE: Fan modules and power supplies are field replaceable units.
NOTE: All fans and PSUs must have the same airflow direction. If you mix the airflow direction, the switch detects the
discrepancy, issues an alarm, and may auto-shutdown to avoid heat damage to components. You must correct the mixed
airflow direction.
Software Requirements
Table 2. Software Requirements
Software Minimum Release Requirement
Dell EMC Networking OS 9.14(2.10)
ONIE 3.38.1.1-3
DIAG Installer 3.38.3.1-2
EDA Diags 3.38.4.1-2
ONIE Firmware Updater 3.38.5.1-0
NOTE: For information about non-Dell OS versions, see Dell EMC S5048F-Open Networking (ON) System Release Notes.
New Dell EMC Networking OS Version 9.14(2.10)
Features
The following features are integrated into the Dell EMC Networking 9.14.2 branch through this release:
None
2