Release Notes
Table Of Contents
- Dell EMC S5048F–ON System Release Notes, OS Version 9.14(2.10)
- Document Revision History
- Requirements
- New Dell EMC Networking OS Version 9.14(2.10) Features
- Restrictions
- Changes to Default Behavior and CLI Syntax
- Documentation Corrections
- Deferred Issues
- Fixed Issues
- Known Issues
- Upgrading the ONIE Package for the S5048F-ON System
- Upgrading the DIAG Package for the S5048F-ON System
- Installing Dell EMC Networking OS on the S5048F-ON using ONIE
- Upgrading the CPLD
- Upgrading the SmartFusion Microcontroller Subsystem — SMF MSS-IAP
- Upgrading the SmartFusion Microcontroller Subsystem — SMF MSS-FPGA
- Upgrading the OOB-FPGA
- Upgrading the S5048F-ON Dell EMC Networking OS Image using Dell EMC Networking OS CLI
- Upgrade the Boot Selector and Boot Flash Images from Dell EMC Networking OS
- Uninstalling the Dell EMC Networking OS
- Installing a Third Party Operating System
- Support Resources
Preparing /dev/sda3 EDA-DIAG for rootfs install
untaring into /tmp/tmp.PBDdoU
rootfs copy done
Success: Support tarball created: /tmp/tmp.PBDdoU/onie-support.tar.bz2
Updating diag-os ver in system-eeprom
Diagos ver 3.38.3.1-2
Deleting TLV 0x2e: Diag Version
Adding TLV 0x2e: Diag Version
Programming passed.
TlvInfo Header:
Id String: TlvInfo
Version: 1
Total Length: 180
TLV Name Code Len Value
-------------------- ---- --- -----
Manufacture Date 0x25 19 05/18/2021 19:11:14
MAC Addresses 0x2A 2 256
Manufacturer 0x2B 5 CES00
Country Code 0x2C 2 CN
Vendor Name 0x2D 8 Dell EMC
Service Tag 0x2F 7 8VSRG02
Vendor Extension 0xFD 4 0x00 0x00 0x02 0xA2
Part Number 0x22 6 0797T2
Serial Number 0x23 20 CN0797T2CES0078G0003
Device Version 0x26 1 1
Label Revision 0x27 3 A00
Base MAC Address 0x24 6 34:17:EB:37:0E:00
Product Name 0x21 9 S5048F-ON
Platform Name 0x28 30 x86_64-dellemc_s5048f_c2538-r0
ONIE Version 0x29 10 3.38.1.1-3
Diag Version 0x2E 10 3.38.3.1-2
CRC-32 0xFE 4 0x6BAC6783
Checksum is valid.
Updating Grub Cfg /dev/sda3 EDA-DIAG
ONIE uefi_uuid B60D-2BA8
INSTALLER DONE...
Removing /tmp/tmp.cdUSCg
ONIE: NOS install successful: diag-installer-x86_64-dellemc_s5048f_c2538-
r0-3.38.3.1-2-2021-05-18.bin
ONIE: Rebooting...
ONIE:/ # discover: installer mode detected.
Stopping: discover...start-stop-daemon: warning: killing process 2638: No such process
done.
Stopping: dropbear ssh daemon... done.
Stopping: telnetd... done.
Stopping: syslogd... done.
Info: Unmounting kernel filesystems
umount: can't umount /: Invalid argument
The system is going down NOW!
Sent SIGTERM to all processes
Sent SIGKILL tosd 4:0:0:0: [sda] Synchronizing SCSI cache
reboot: Restarting system
reboot: machine restart
Installing Dell EMC Networking OS on the S5048F-ON
using ONIE
NOTE:
You will need the Dell EMC Networking OS installer package, ONIE-FTOS-S5048F-ON-9.14.2.10.bin to
install the Dell EMC Networking OS on your S5048F-ON system that has only ONIE.
To install the Dell EMC Networking OS version 9.14(2.10) on a new S5048F-ON device, perform the following steps:
13