Deployment Guide

Related
Commands
● login authentication — sets the database to be checked when a user logs in.
● radius-server key — sets an authentication key for RADIUS communications.
● radius-server retransmit — sets the number of times the RADIUS server attempts to send
information.
● radius-server timeout — sets the time interval before the RADIUS server times out.
radius-server vrf
Create an association between a RADIUS server group and a VRF and source interface.
ud
Syntax
radius-server vrf vrf-name [source-interface interface]
To delete the association between a RADIUS server group and a VRF and source interface, use the no
radius-server vrf vrf-name [source-interface interface] command.
Parameters
vrf vrf-name Enter the keyword vrf and then the name of the VRF to associate a RADIUS
server group with that VRF.
interface Enter the following keywords and slot/port or number information:
● For a 1-GigabitEthernet interface, enter the keyword GigabitEthernet then
the slot/port information.
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
● For a Loopback interface, enter the keyword loopback then a number from 0
to 16383.
● For a port channel interface, enter the keywords port-channel then a
number.
● For a Null interface, enter the keyword null then the Null interface number.
●
For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.
Defaults Not configured.
Command Modes RADIUS SERVER GROUP
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.2(1.0) Introduced on the Z9500.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.0) Introduced on the Z9500.
9.4(0.0) Introduced on the S-Series and Z9000.
Usage
Information
You can use this command to associate a group of RADIUS servers with a VRF and source interface. You
can configure the source interface only with the VRF attribute and source interface is optional with the
VRF attributes.
Security 1369