CLI Guide

Parameters
stack-unit
number
Enter the port number. The range is from 1–6.
Command Modes EXEC Privilege
Command
History
Version Description
9.10(0.1) Introduced on the S6010-ON.
9.7(0.0) Introduced on the S6000 and S6000–ON.
Example
Dell#show system stack-unit 1 quad-port-profile
Configured fan out profile ports in stack-unit 1
Configured Activated
2 2
4 4
6 6
8 8
9 9
10 10
11 11
12 12
13 13
14 14
15 15
16 16
17 17
18 18
19 19
20 20
21 21
22 22
23 23
24 24
25 25
27 27
29 29
31 31
Related
Commands
stack-unit portmode — splits a single 40G port into four-10G ports
stack-unit portmode quad
Configures the list of dynamic fan-out capable ports.
Syntax
stack-unit [stack-unit number] port port-number portmode quad
To remove the quad-port configuration, use the command.
Parameters
stack-unit
number
Enter the port number. The range is from 1 to 6.
Defaults 2,4,6,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,27,29,31
Command Modes CONFIGURATION
Command
History
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.7(0.0) Introduced on the S6000 and S6000–ON.
Interfaces 695