CLI Guide

Version Description
9.11(2.1P1) Introduced the vrf keyword on all the remaining Dell EMC Networking OS
platforms.
9.10(0.2) Introduced the vrf keyword on the S3048–ON, S4048–ON, S4048T-ON, S6010–
ON, Z9100–ON, and S6100–ON.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.2(1.0) Introduced on the Z9500.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.8.0 Added support for BFD for BGP on the S4810.
8.4.1.3 Added support for BFD for BGP on the E-Series.
8.2.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the C-Series.
7.5.1.0 Added support for BFD for VLAN and port-channel interfaces on the E-Series.
7.4.1.0 Introduced BFD on physical ports on the E-Series.
Example
The following example shows the show bfd neighbors command output for the default VRF.
DellEMC# show bfd neighbors
* - Active session role
Ad Dn - Admin Down
B - BGP
C - CLI
I - ISIS
O - OSPF
O3 - OSPFv3
R - Static Route (RTM)
M - MPLS
V - VRRP
VT - Vxlan Tunnel
LocalAddr RemoteAddr Interface State Rx-int Tx-int Mult Clients
* 10.1.3.2 10.1.3.1 Te 1/3/1 Up 300 250 3 C
DellEMC(conf)#do sho bfd vrf vrf2 neighbors
* - Active session role
Ad Dn - Admin Down
B - BGP
C - CLI
I - ISIS
O - OSPF
O3 - OSPFv3
R - Static Route (RTM)
M - MPLS
V - VRRP
VT - Vxlan Tunnel
LocalAddr RemoteAddr Interface State Rx-int Tx-int Mult
VRF Clients
* 13.1.1.1 13.1.1.2 Te 1/1/ Up 200 200 3 2
320
Bidirectional Forwarding Detection (BFD)