Users Guide

● hmac-sha1
● hmac-sha1-96
● hmac-sha2-256
When FIPS is enabled, the default HMAC algorithm is hmac-sha1-96.
When FIPS is not enabled, the default HMAC algorithms are the following:
● hmac-md5
● hmac-md5-96
● hmac-sha1
● hmac-sha1-96
● hmac-sha2-256
kex
key-exchange-
algorithm
Enter the keyword kex and then a space-delimited list of key exchange algorithms
supported by the SSH server.
The following key exchange algorithms are available:
● diffie-hellman-group-exchange-sha1
● diffie-hellman-group1-sha1
● diffie-hellman-group14-sha1
When FIPS is enabled, the default key-exchange-algorithm is diffie-hellman-
group14-sha1.
When FIPS is not enabled, the default key-exchange-algorithms are the following:
● diffie-hellman-group-exchange-sha1
● diffie-hellman-group1-sha1,
● diffie-hellman-group14-sha1
port port-number (OPTIONAL) Enter the keyword port then the port number of the listening port of
the SSH server. The range is from 1 to 65535. The default is 22.
[version 2] (OPTIONAL) Enter the keyword version then the SSH version 2, to specify
SSHv2.
Defaults
● Default listening port is 22.
● Default cipher list is 3des-cbc,aes128-cbc,aes192-cbc,aes256-cbc,aes128-ctr,aes192-ctr,aes256-ctr.
● When FIPS is enabled, the default is hmac-sha1-96.
● When FIPS is not enabled, the default is hmac-md5,hmac-md5-96,hmac-sha1,hmac-sha1-96,hmac-
sha2-256.
● When FIPS is enabled, the default is diffie-hellman-group14-sha1.
● When FIPS is not enabled, the default is diffie-hellman-group-exchange-sha1,diffie-hellman-group1-
sha1,diffie-hellman-group14-sha1.
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.12(0.0) Removed support for SSHv1 from all platforms.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
1478 Security