Setup Guide

Defaults None
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.0 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
show hardware stack-unit
Display the data plane or management plane input and output statistics of the designated component of the designated stack
member.
Syntax
show hardware stack-unit stack-unit-number {cpu {data-plane statistics |
i2c statistics | management statistics | party-bus statistics | sata-
interface statistics} | drops [unit unit-number] | fpga registers | stack-
port stack-port-number | unit unit-number {counters | details | ipmc-
replication | port-stats [detail] | register | table-dump table-name}}
Parameters
stack-unit stack-
unit-number
{command-
option}
Enter the keywords stack-unit to select a particular stack member and then
enter one of the following command options to display a collection of data based on
the option entered. The range is from 1 to 6.
cpu data-plane
statistics
Enter the keywords cpu data-plane statistics to display the data plane
statistics.
cpu i2c statistics Enter the keywords cpu i2c statistics to display the counters of i2c
devices.
cpu management
statistics
Enter the keywords cpu management statistics to display the counters of
the management port.
cpu party-bus
statistics
Enter the keywords cpu party-bus statistics, to display the Management
plane input/output counter statistics of the pseudo party bus interface.
cpu sata-
interface
statistics
Enter the keywords cpu sata-interface statistics to display the sata
interface error counter statistics.
drops [unit unit-
number ]
Enter the keyword drops to display internal drops on the selected stack member.
Enter the optional keyword unit unit-number to display the internal drop
counters of the specified port pipe.
fpga register Enter the keyword to display the register value of the fpga register.
Debugging and Diagnostics 509