Setup Guide

Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced the verbose option.
7.7.1.0 Introduced on the S-Series.
Hardware Commands
These commands display information from a hardware sub-component or ASIC.
clear hardware stack-unit
Clear statistics from selected hardware components.
Syntax
clear hardware stack-unit id {counters | cpu {data-plane statistics | i2c
statistics | sata-interface statistics} | unit number counters | stack-port
stack-port-number}
Parameters
stack-unit id Enter the keywords stack-unit then a number to select a particular stack
member and then enter one of the following command options to clear a specific
collection of data. The range is from 1 to 6.
counters Enter the keyword counters to clear the counters on the selected stack member.
cpu data-plane
statistics
Enter the keywords cpu data-plane statistics to clear the data plane
statistics.
cpu i2c statistics Enter the keywords cpu i2c statistics to clear the i2c devices statistics.
cpu party-bus
statistics
Enter the keywords cpu party-bus statistics to clear the management
statistics.
cpu sata-
interface
statistics
Enter the keywords cpu sata-interface statistics to clear the sata
interface statistics.
stack-port Enter the keywords stack-port then the port number of the stacking port to
clear the statistics of the particular stacking port.
Defaults None
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Increased the stacking range to 12 units in S3100 series.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
504 Debugging and Diagnostics