Setup Guide

Version Description
9.10(0.1P10)) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S6000.
Usage
Information
You must configure feature VXLAN to configure VXLAN-instance.
Related
Commands
vxlan-instance — Enable VXLAN Instance configuration on the platform.
fail-mode
Configures failure-mode on the platform.
Syntax
fail-mode secure
To disable the fail-mode secure, use the no fail-mode securecommand.
Parameters
secure Enter the keyword secure to delete all its database and hardware flows/
resources, when the VTEP loses connectivity with the controller.
Defaults non secure
Command Modes VXLAN INSTANCE
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S6100–ON.
9.10(0.1P10) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S6000.
Related
Commands
vxlan-instance— Enable VXLAN Instance configuration on the platform.
gateway-ip
Configures gateway IP address on the platform.
Syntax
gateway-ip IP address
Parameters
IP address Enter the IP address of the gateway for the VXLAN instance.
Defaults Disabled
Command Modes VXLAN INSTANCE
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
EMC Networking OS Command Line Reference Guide.
Virtual Extensible LAN (VXLAN) 1665