Setup Guide

Example
DellEMC#show storm-control pfc statistics stack-unit 1 port-set 0
-----------------------------------------------------------------------
Interface Priority Discard State Discard State Clear Count
Count forced No rxPfc
-----------------------------------------------------------------------
Te 1/1/1 3 2 0 0
4 2 0 0
5 2 0 0
6 2 0 0
Te 1/1/1 3 0 0 0
4 0 0 0
5 0 0 0
6 0 0 0
Te 1/1/2 3 2 0 0
4 2 0 0
5 2 0 0
6 2 0 0
Te 1/1/3 3 2 0 0
4 2 0 0
5 2 0 0
6 2 0 0
Te 1/1/4 3 2 0 0
4 2 0 0
5 2 0 0
6 2 0 0
Te 1/1/5 3 2 0 0
4 2 0 0
5 2 0 0
6 2 0 0
Te 1/1/8 3 0 0 0
4 0 0 0
5 0 0 0
6 0 0 0
DellEMC#
clear storm-control pfc statistics
Clears the discard state count and cleared count statistics. If the queue is in discard state during clear, the discard state count
will start from 1.
Syntax
clear storm-control pfc statistics stack-unit {unit-number} port-set
{portpipe-number}
Parameters
unit-number Enter the stack unit number.
portpipe-number Enter the port set number.
Defaults None
Command Modes EXEC Privilege.
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the S6000, S6000–ON, S6100–ON, Z9100–ON.
Usage
Information
The clear storm-control pfc statistics command is used to clear the discard count and
cleared count statistics on the specified stack unit and port set.
Related
Commands
show storm-control pfc statistics — used to view the statistical data of the PFC storm on the specified
stack unit and the port set.
show storm-control broadcast
Display the storm control broadcast configuration.
Syntax
show storm-control broadcast [interface]
1532 Storm Control