Release Notes

Bootselector image upgrade for stack-unit 1 completed successfully.
DellEMC#
2. Reload the unit.
EXEC Privilege Mode
reload
3. Verify the Boot Selector image.
EXEC Privilege Mode
show system stack-unit <id>
DellEMC#show system stack-unit 1
-- Unit 1 --
Unit Type : Management Unit
Status : online
Next Boot : online
Required Type : S4048T-ON - 48x10G, 6x40G TE/FO G (S4048T-ON)
Current Type : S4048T-ON - 48x10G, 6x40G TE/FO G (S4048T-ON)
Master priority : 14
Hardware Rev : 2.0
Num Ports : 72
Up Time : 1 hr, 14 min
Dell EMC Networking OS Version : 9.14(2.10)
Jumbo Capable : yes
POE Capable : no
FIPS Mode : disabled
Boot Flash : 3.27.2.10
Boot Selector : 3.27.0.0-4
Memory Size : 3181805568 bytes
Temperature : 33C
Voltage : ok
Serial Number : NA
Part Number : 0YVCK0 Rev A00
Vendor Id : DL
Date Code : 05182021
Country Code : CN
Piece Part ID : CN-0YVCK0-28298-6BM-0080
PPID Revision : A00
Service Tag : 34P0Y42
Expr Svc Code : 681 424 632 2
Auto Reboot : enabled
Burned In MAC : f4:8e:38:2b:3e:85
No Of MACs : 3
-- Power Supplies --
Unit Bay Status Type FanStatus FanSpeed(rpm)
---------------------------------------------------------------------------
1 1 up AC up 14688
1 2 down UNKNOWN down 0
-- Fan Status --
Unit Bay TrayStatus Fan1 Speed Fan2 Speed
------------------------------------------------------------------------------------
1 1 up up 7840 up 7546
1 2 up up 7840 up 7546
1 3 up up 7840 up 7546
1 4 up up 7840 up 7546
Speed in RPM
Upgrade the GRUB or Boot Flash
To upgrade the GRUB or Boot Flash from Dell EMC Networking OS, perform the following steps:
1. Upgrade the S4048T-ON Boot Flash image.
EXEC Privilege Mode
9