Release Notes
Table Of Contents
- Dell EMC System S4048T–ON 9.14(2.10) Release Notes
- Document Revision History
- Supported Hardware
- Supported Software
- New Dell EMC Networking OS Version 9.14(2.10) Features
- Restrictions
- Changes to Default Behavior and CLI Syntax
- Documentation Corrections
- Deferred Issues
- Fixed Issues
- Known Issues
- Upgrading the sub-components
- Upgrading the ONIE Package for the S4048T-ON System
- Upgrading the DIAG Package for the S4048T-ON System
- Installing Dell EMC Networking OS on the S4048T-ON using ONIE
- Support Resources
Hardware
Six fixed QSFP+ ports supporting either one port of 40G or four ports of 10G in breakout mode
Two PSUs
Four fan modules
One MicroUSB serial console port
One universal serial bus (USB Type-A) port for additional file storage
Management Ethernet interface
RS-232 Serial interface
Dual core 1.7GHz Rangeley central processing unit (CPU) system
Temperature monitoring
Software-readable thermal monitor
Real time clock (RTC) support
Two hot pluggable redundant power supplies
Power management monitoring
Four removable fans
Standard 1U chassis
The following lists the individual Dell S4048T–ON system hardware components that are available to order:
Table 2. Hardware Components Available to Order
Fan with airflow from I/O side to PSU side (red — normal air flow direction)
Fan with airflow from PSU side to I/O side (blue — reversed air flow direction)
AC or DC power supply with airflow from I/O side to PSU side
AC or DC power supply with airflow from PSU side to I/O side
NOTE: Fan modules and power supplies are field replaceable units.
NOTE: All fans and PSUs must have the same airflow direction. If you mix the airflow direction, the switch detects the
discrepancy, issues an alarm, and may auto-shutdown to avoid heat damage to components. You must correct the mixed
airflow direction.
Supported Software
The following software is supported with this platform:
Software
Minimum Release Requirement
Dell EMC Networking OS 9.14(2.10)
2