Release Notes

upgrade system [flash: | ftp: stack-unit <1-6> | tftp: | scp: | usbflash:] [A: | B:]
DellEMC#upgrade system ftp: a:
Address or name of remote host []: 10.16.127.86
Source file name []: /tftpboot/ONIE-FTOS-SK-9.14.2.10.bin
User name to login remote host: veswar
Password to login remote host:
!!!!!!!!!May 18 06:10:47: %S4048T-ON:1 %KERN-6-INT: CP Mgmt port receiving excessive
traffic; will be rate controlled
!!!!!!!!!!!May 18 06:10:58: %S4048T-ON:1 %KERN-6-INT: CP Mgmt port receiving
excessive traffic; will be rate controlled
- repeated 3 times
!!!!!!!!!!!!!!!!!!!!!!!May 18 06:11:22: %S4048T-ON:1 %KERN-6-INT: CP Mgmt port
receiving excessive traffic; will be rate controlled
- repeated 5 times
!!!!!!!!..............................................................................
......................................................................................
......................................................................................
......................................................................................
......................................................................................
......................................................................................
......................................................................................
......................................................................................
......................................................................................
......................................................................................
.......!
66927711 bytes successfully copied
System image upgrade completed successfully.
DellEMC#May 18 06:12:19: %STKUNIT1-M:CP %DOWNLOAD-6-UPGRADE: Upgrade completed
successfully
3. Verify that the Dell EMC Networking OS has been upgraded correctly in the upgraded flash partition
EXEC Privilege Mode
show boot system stack-unit [1-6] | all]
DellEMC#show boot system stack-unit all
Current system image information in the system:
==================================================================
Type Boot Type A B
------------------------------------------------------------------
stack-unit 1 FLASH BOOT 9.14(2.10)[boot] 9.14(2.9)
stack-unit 2 is not present.
stack-unit 3 is not present.
stack-unit 4 is not present.
stack-unit 5 is not present.
stack-unit 6 is not present.
DellEMC#
4. Change the Primary Boot Parameter of the S4048T-ON to the upgraded partition A: or B:
CONFIGURATION Mode
boot system stack-unit 1 primary system: [A: | B: | tftp: | ftp:]
5. Save the configuration so that the configuration will be retained after a reload using write memory command.
EXEC Privilege Mode
write memory
DellEMC#
DellEMC#write memory
!
May 18 06:15:48: %STKUNIT1-M:CP %FILEMGR-5-FILESAVED: Copied running-config to
startup-config in flash by default
DellEMC#
19