Release Notes
Table Of Contents
- Dell EMC System S4048T–ON 9.14(2.10) Release Notes
- Document Revision History
- Supported Hardware
- Supported Software
- New Dell EMC Networking OS Version 9.14(2.10) Features
- Restrictions
- Changes to Default Behavior and CLI Syntax
- Documentation Corrections
- Deferred Issues
- Fixed Issues
- Known Issues
- Upgrading the sub-components
- Upgrading the ONIE Package for the S4048T-ON System
- Upgrading the DIAG Package for the S4048T-ON System
- Installing Dell EMC Networking OS on the S4048T-ON using ONIE
- Support Resources
NOTE: You must copy the diag-installer-x86_64-s4048t_c2338-r0.bin file to the /tftpboot folder in
the server.
The DIAG is updated on the system, as shown:
ONIE:/ # onie-nos-install tftp://10.16.127.86/diag-installer-x86_64-s4048t_c2338-
r0.bin
discover: installer mode detected.
Stopping: discover... done.
Info: Fetching tftp://10.16.127.86/diag-installer-x86_64-s4048t_c2338-r0.bin ...
Eswar/diag-installer 100% |*******************************| 148M 0:00:00 ETA
ONIE: Executing installer: tftp://10.16.127.86/diag-installer-x86_64-s4048t_c2338-
r0.bin
Ignoring Verifying image checksum ... OK.
cur_dir / archive_path /installer tmp_dir /tmp/tmp.a5Kpax
Preparing image archive ...sed -e '1,/^exit_marker$/d' /installer | tar xf - OK.
Diag-OS Installer: platform: x86_64-s4048t_c2338-r0
Found EDA-DIAG partition at (/dev/sda3)
/tmp/diag_os_install_mode does not exist, installer would run in update mode
Diag OS Installer Mode : UPDATE
EDA-DIAG dev is /dev/sda3
Mounted /dev/sda3 on /tmp/tmp.jZpckM
Update mode: Copying rootfs.....
Preparing /dev/sda3 EDA-DIAG for rootfs install
untaring into /tmp/tmp.jZpckM
rootfs copy done
Success: Support tarball created: /tmp/tmp.jZpckM/onie-support.tar.bz2
INSTALLER DONE...
Removing /tmp/tmp.a5Kpax
Rebooting...
ONIE:/ # discover: installer mode detected.
Stopping: discover...start-stop-daemon: warning: killing process 546: No such process
done.
Stopping: dropbear ssh daemon... done.
Stopping: telnetd... done.
Stopping: syslogd... done.
Info: Unmounting kernel filesystems
The system is going down NOW!
Sent SIGTERM to all processes
Sent SIGKILL tosd 4:0:0:0: [sda] Synchronizing SCSI cache
Restarting system.
machine restart
Installing Dell EMC Networking OS on the S4048T-ON
using ONIE
NOTE:
You will need the Dell EMC Networking OS installer package, ONIE-FTOS-SK-9.14.2.10.bin to install the Dell
EMC Networking OS on your S4048T-ON system that has only ONIE.
To install the Dell EMC Networking OS version 9.14(2.10) on a new S4048T-ON device, perform the following steps:
1. Reboot the system. During the reboot process, the system displays the following message prompting you to press the Esc
key in order to stop the auto-boot process:
Press Esc to stop autoboot ... 5
Grub 2.02~beta2 (Dell EMC Inc)
Built by root at ubuntu on Tue_May_18_13:04:17_UTC_2021
S4048T Boot Flash Label 3.27.2.10 NetBoot Label 3.27.2.10
16