Deployment Guide

Table 75. RPM over VLT Scenarios (continued)
Scenario RPM Restriction Recommended Solution
Mirroring member port of ICL LAG to
VLT LAG — In this scenario, a member
port of the ICL LAG is mirrored to the
VLT LAG on the same VLT device. The
packet analyzer is connected to the TOR
switch.
No restrictions apply. The bandwidth of
the VLTi link is unnecessarily used by
mirrored traffic if max rate limit value is
configured in the RPM mirror session.
If you want to mirror traffic in the TOR
locally, use local Port mirroring session
instead of RPM.
Mirroring with a VLAN as source and
destination — If the members of the
source and destination VLANs are same
in a single monitoring session.
No restrictions apply. None.
Mirroring with an interface or LAG as
source and destination --- If the source
and destination interface or LAG of a
monitor session are same.
No restrictions apply. None.
Port Monitoring 753