Deployment Guide

Define the Interface Range
The following example shows how to define an interface-range macro named “test” to select 10–GigabitEthernet interfaces 5/1
through 5/4.
Dell(config)# define interface-range test tengigabitethernet 5/1 - 4
Choosing an Interface-Range Macro
To use an interface-range macro, use the following command.
● Selects the interfaces range to be configured using the values saved in a named interface-range macro.
CONFIGURATION mode
interface range macro name
The following example shows how to change to the interface-range configuration mode using the interface-range macro named
“test.”
Dell(config)# interface range macro test
Dell(config-if)#
Monitoring and Maintaining Interfaces
Monitor interface statistics with the monitor interface command. This command displays an ongoing list of the interface
status (up/down), number of packets, traffic statistics, and so on.
To view the interface’s statistics, use the following command.
● View the interface’s statistics.
EXEC Privilege mode
Enter the type of interface and slot/port information:
○ For the Management interface, enter the keyword ManagementEthernet then the slot/port information.
○ For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information.
○ For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port information.
○ For a port extender (PE) Gigabit Ethernet interface, enter the keyword peGigE then the pe-id/pe-stack—unit-id/port-
number information.
○ For a port extender 10-Gigabit Ethernet interface, enter the keyword peTenGigE then the pe-id/stack-unit/port-id
information.
The information displays in a continuous run, refreshing every 2 seconds by default. To manage the output, use the following
keys.
● m — Change mode
● l — Page up
● T — Increase refresh interval (by 1 second)
● t — Decrease refresh interval (by 1 second)
● c — Clear screen
● a — Page down
● q — Quit
Dell#monitor interface te 3/1
FTOS uptime is 1 day(s), 4 hour(s), 31 minute(s)
Monitor time: 00:00:00 Refresh Intvl.: 2s
Interface: Te 3/1, Disabled, Link is Down, Linespeed is 1000 Mbit
Traffic statistics: Current Rate Delta
Input bytes: 0 0 Bps 0
Output bytes: 0 0 Bps 0
432
Interfaces