Administrator Guide

memory pe 4
summary
------------------ ----------- ----------- ----------- -----------
PE-UNIT0 1073741824 343896064 343846912 729894912
show reset-reason
Display the reason for the last system reboot.
Syntax
show reset-reason
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.13(0.0) Introduced on the S3048–ON, S3100 series, S4048–ON, S4048T–ON, S5000,
S6000, S6000–ON, S6010–ON, S6100–ON, Z9100–ON, C9010, MXL, M-IOA, and
FN-IOM.
Usage
Information
You can use the show reset-reason without the stack-unit option to view the reason for the last
system reboot of the local system.
Example —
Unknown reason
If the reason for the last system reboot is not available, the system displays the reason as N/A.
DellEMC# show reload-reason
Cause: N/A
Time: N/A
Example
DellEMC# show reset-reason
Last Reset Reason:
---------------------
Type Cause Time
-----------------------------------------------------------------------------------
rpm 0 (CP) Reboot by Software 11/05/2017-08:05
rpm 0 (RP) Reboot by Software 11/05/2017-08:05
rpm 1 (CP) Power on Reset N/A
rpm 1 (RP) Power on Reset N/A
linecard 0 N/A N/A
linecard 1 N/A N/A
linecard 2 N/A N/A
linecard 3 N/A N/A
linecard 4 Warm Reset N/A
linecard 5 N/A N/A
linecard 6 N/A N/A
linecard 7 N/A N/A
linecard 8 N/A N/A
linecard 9 N/A N/A
linecard 10 Power on Reset N/A
linecard 11 Power on Reset N/A
DellEMC#show reset-reason pe all
Last Reset Reason:
---------------------
Type Cause
Time
---------------------------------------------------------------------------
--------
PE ID: 10
==========
stack-unit 0 N/A
N/A
stack-unit 1 N/A
132
Control and Monitoring