Administrator Guide

Version Description
9.2(1.0) Introduced on the Z9500.
9.1.(0.0) Introduced on the S4810 and Z9000.
8.3.19.0 Introduced on the S4820T.
7.8.1.0 Added support for C-Series.
7.4.1.0 Introduced on E-Series.
Example
Example (detail)
Command Fields
Lines
Beginning
With or
Including
Description
OSPFv3... Debugging is on for all OSPFv3 packets and all interfaces.
05:21:01 Displays the time stamp.
Sending Ver:3 Sending OSPF3 version..
type: Displays the type of packet sent:
● 1 - Hello packet
● 2 - database description
● 3 - link state request
● 4 - link state update
● 5 - link state acknowledgement
Length: Displays the OSPFv3 packet length.
Router ID: Displays the OSPFv3 router ID.
Area ID: Displays the OSPFv3 area ID.
Chksum: Displays the OSPFv3 checksum.
debug ipv6 ospf spf
Display debug information for SPF timers on OSPF IPv6 packets.
Syntax
[no] debug ipv6 ospf spf
Parameters
interface
(OPTIONAL) Enter one of the following keywords and slot/port or number
information:
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
● For a port channel interface, enter the keywords port-channel then a
number.
● For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
1224 Open Shortest Path First (OSPFv2 and OSPFv3)