Glossary

Configuring and Controling VXLAN from Nuage
Controller GUI
The Dell EMC Networking OS supports Nuage controller for VXLAN. You can configure and control VXLAN from the Nuage
controller GUI, by adding a hardware device to the Nuage controller and authenticating the device.
1. Under the Infrastructure tab, add a datacenter gateway.
Figure 163. Add Data center Gateway
2. Create port-to-VLAN mappings.
Figure 164. Port-to-VLAN mappings
3. Under the Networks tab, create an L2 domain. Under the L2 domain, create a logical network (VNI) and add access ports of
the VTEP in the logical network.
Figure 165. Access ports of the VTEP
1070
Virtual Extensible LAN (VXLAN)