Deployment Guide

ManualsBrandsDell ManualsAccess PlatformsOS9

961

962

963

964

965

966

967

968

969

970

Table Of Contents

out Enter the keyword out to display information for an ipv6 egress access-list

attached to an interface.

interface Enter the keyword interface to display information for an ipv6 access-list for a

specific interface.

Defaults None

Command Modes EXEC

Command

History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the C9010.

Usage

Information

No output displays If you do not attach an ingress or egress access-list to an interface and you return to

the DELL# prompt.

Example

Dell#show ipv6 access-list V6-ACL in

Ingress IPV6 access list V6-ACL

seq 5 permit tcp any any count (0 packets)

seq 10 permit udp any any count (0 packets)

Dell#

show ipv6 accounting access-list

View the IPv6 access-list and the sequence of filters.

C9000 Series

Syntax

show ipv6 accounting {access-list access-list-name | cam_count} interface

interface

Parameters

access-list-name

Enter the name of the ACL that you want to display. The ACL name size is limited

to 140 characters.

cam_count

List the count of the CAM rules for this ACL.

interface

Enter the keyword interface and the interface type and slot/port or number

information:

● For a Port Channel interface, enter the keywords port-channel a port

channel number.The range is from 1 to 128.

● For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet and the slot/port information.

● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE and the

slot/port information.

Command Modes

● EXEC

● EXEC Privilege