Deployment Guide

Success rate is 100.0 percent (5/5), round-trip min/avg/max = 0/0/0 (ms)
Dell#
power on
C9000 Series
Syntax
power on
Command Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
reload
Reboot the system.
C9000 Series
Syntax
reload [conditional nvram-cfg-change | pe pe-id]
From a PE console, use reload to perform a cold restart.
Parameters
conditional
nvram-cfg-
change
Reload if the condition is true. A configuration change to the nvram requires a
switch reload. To reload the switch, select nvram-cfg-change.
pe Reload the RMP, PE unit, or the entire PE stack configured under that PE unit.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010 and C1048P.
9.2(1.0) Introduced on the Z9500.
9.1(0.0) Added ‘conditional’ parameter.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Control and Monitoring 93