Deployment Guide

Restart ACK rcv count : 0 (level-1), 0 (level-2)
Restart Req rcv count : 0 (level-1), 0 (level-2)
Suppress Adj rcv count : 0 (level-1), 0 (level-2)
Restart CSNP rcv count : 0 (level-1), 0 (level-2)
Database Sync count : 0 (level-1), 0 (level-2)
show isis hostname
Display IS-IS host names configured or learned on the switch.
C9000 Series
Syntax
show isis hostname [vrf vrf-name]
Parameters
vrf vrf-name Enter the keyword vrf followed by the name of the VRF to display IS-IS host names
corresponding to that VRF.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Added support for VRF. Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
Example
Dell#show isis hostname
System Id Dynamic Name Static Name
*F100.E120.0013 Force10 ISIS
Dell#
show isis interface
Display detailed IS-IS interface status and configuration information.
C9000 Series
Syntax
show isis interface [interface][vrf vrf-name]
Parameters
interface (OPTIONAL) Enter the following keywords and slot/port or number information:
854 Intermediate System to Intermediate System (IS-IS)