Deployment Guide

ManualsBrandsDell ManualsAccess PlatformsOS9

831

832

833

834

835

836

837

838

839

840

Table Of Contents

Command

History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OSCommand Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the C9010.

9.5(0.1) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

8.3.11.1 Introduced on the Z9000.

Usage

Information

You can configure priorities independently for Level 1 and Level 2. Priorities determine which router on a

LAN is the designated router. Priorities are advertised within hellos. The router with the highest priority

becomes the designated intermediate system (DIS).

NOTE: Routers with a priority of 0 cannot be a designated router.

Setting the priority to 0 lowers the chance of this system becoming the DIS, but does not prevent it. If all

the routers have priority 0, one with highest MAC address becomes DIS even though its priority is 0.

is-type

Configure IS-IS operating level for a router.

C9000 Series

Syntax

is-type {level-1 | level-1-2 | level-2-only}

To return to the default values, use the no is-type command.

Parameters

level-1 Allows a router to act as a Level 1 router.

level-1-2 Allows a router to act as both a Level 1 and Level 2 router. This setting is the

default.

level-2-only Allows a router to act as a Level 2 router.

Defaults level-1-2

Command Modes ROUTER ISIS