Deployment Guide

Sym Pause : False
AutoNegotiation Expansion
ParallelDetectionFault : False
1000Base-T Control
MasterSlave_Mode : Auto
1000MegFullDplx : True
1000MegHalfDplx : False
1000Base-T Status
Master/Slave Fault : No
Master/Slave : Slave
Local RX OK : False
Remote RX OK : False
Link Partner 1G FD : False
Link Partner 1G HD : False
Idle Err Cnt : 0
PHY Extended Control
MDI Crossover_mode : Enabled
Example
Related
Commands
show interfaces — displays information on a specific physical interface or virtual interface.
show interfaces status
To display status information on a specific interface only, display a summary of interface information or specify a line card slot
and interface.
C9000 Series
Syntax
show interfaces [interface | linecard slot-number] status
Parameters
interface (OPTIONAL) Enter one of the following keywords and slot/port or number
information:
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port (ports or port-range) information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port (ports or port-range) information.
● For a Loopback interface, enter the keyword loopback then the slot/port
information. The range is from 0 to 16383.
● For a Port-Channel interface, enter the keyword port-channel then the
number. The range is from 0 to 128.
● For a port extender Gigabit Ethernet interface, enter the keyword peGigE then
the pe-id / stack-unit / port-id information. The pe-id range is from 0 to 255;
the stack-unit unit-number range is from 0 to 7; and the port-id range is from 1
to 48.
● For a port extender 10-Gigabit Ethernet interface, enter the keyword
peTenGigE then the pe-id / stack-unit / port-id information. The pe-id range
is from 0 to 255; the stack-unit unit-number range is from 0 to 7; and the
port-id range is 25 to 28 or 49 to 52 depending on the PE.
NOTE: The peGigE or peTenGigE interface option is only visible when the
feature extended bridge is enabled.
linecard slot-
number
(OPTIONAL) Enter the keyword linecard then the slot number. The slot ID is
from 0 to 11.
Defaults none
Interfaces 759