Deployment Guide

● aes128-ctr : Force ssh to use the aes192-ctr encryption cipher.
● aes128-cbc : Force ssh to use the aes192-cbc encryption cipher.
● 3des-cbc : Force ssh to use 3des-cbc encryption cipher.
With the FIPS mode enabled:
● aes256-ctr : Force ssh to use the aes256-ctr encryption cipher.
● aes256-cbc : Force ssh to use the aes256-cbc encryption cipher.
● aes192-ctr : Force ssh to use the aes192-ctr encryption cipher.
● aes192-cbc : Force ssh to use the aes192-cbc encryption cipher.
● aes128-ctr : Force ssh to use the aes192-ctr encryption cipher.
● aes128-cbc : Force ssh to use the aes192-cbc encryption cipher.
● 3des-cbc : Force ssh to use 3des-cbc encryption cipher.
-l username (OPTIONAL) Enter the keyword —l then the user name used in this SSH session.
The default is the user name of the user associated with the terminal.
-m HMAC
algorithm
Enter one of the following HMAC algorithms to use. (For v2 clients only.):
Without the FIPS mode enabled:
● hmac-sha2-256 : Force ssh to use the hmac-sha2-256 HMAC algorithm.
● hmac-sha1: Force ssh to use the hmac-sha1 HMAC algorithm.
● hmac-shal-96: Force ssh to use the hmac-sha1–96 HMAC algorithm.
● hmac-md5: Force ssh to use the hmac-md5 HMAC algorithm.
● hmac-md5–96: Force ssh to use the hmac-md5–96 HMAC algorithm.
With the FIPS mode enabled:
● hmac-sha2-256 : Force ssh to use the hmac-sha2-256 HMAC algorithm.
● hmac-sha1: Force ssh to use the hmac-sha1 HMAC algorithm.
● hmac-sha1–96: Force ssh to use the hmac-sha1–96 HMAC algorithm.
-p port-number (OPTIONAL) Enter the keyword —p then the port number.
The range is 1 to 65536
The default is 22
-v {1|2} (OPTIONAL) Enter the keyword —v then the SSH version 1 or 2.
The default: The version from the protocol negotiation.
NOTE: If the FIPS mode is enabled, this option does not display in the output.
Defaults As indicated above.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Removed the support for hmac-sha2-256-96 algorithm.
9.9(0.0) Introduced on the C9010.
9.5(0.1) Introduced on the Z9500.
9.1(0.0) Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
Related
Commands
ip ssh server Configure an SSH server.
672 FIPS Cryptography