Deployment Guide

EID 0x000003f9: gid=0xd,
slice=11, slice_idx=0x7, part =0 prio=0x3f9, flags=0x10602,
Installed, Enabled
tcam: color_indep=1024,
Stage
InPorts
DATA=0x00000000000000000000000000000000000000000000000c000000000000
MASK=0x00000000000000000000000000000000000000000000000dffffffffffff
HiGig
Offset: 320 Width: 1
DATA=0x00000000
MASK=0x00000001
DstIp
Offset: 105 Width: 32
DATA=0x7f080161
MASK=0xffffffff
OuterVlanId
Offset: 8 Width: 12
DATA=0x00000ffc
MASK=0x00000fff
action={act=CosQNew, param0=8(0x8), param1=0(0), param2=0(0),
param3=0(0)}
action={act=RedirectPort, param0=6(0x6), param1=0(0),
param2=0(0), param3=0(0)}
policer=
statistics={stat id 60 slice = 0 idx=17 entries=1}{Packets}
######### FP Entry for IPC traffic destined to stack_unit 7 PE CPU#######
EID 0x000003f8: gid=0xd,
slice=11, slice_idx=0x8, part =0 prio=0x3f8, flags=0x10602,
Installed, Enabled
tcam: color_indep=1024,
Stage
InPorts
DATA=0x0000000000000000000000000000000000000000000000c000000000000
MASK=0x0000000000000000000000000000000000000000000000dffffffffffff
HiGig
Offset: 320 Width: 1
DATA=0x00000000
MASK=0x00000001
DstIp
Offset: 105 Width: 32
DATA=0x7f080171
MASK=0xffffffff
OuterVlanId
Offset: 8 Width: 12
DATA=0x00000ffc
MASK=0x00000fff
action={act=CosQNew, param0=8(0x8), param1=0(0), param2=0(0),
param3=0(0)}
action={act=RedirectPort, param0=7(0x7), param1=0(0), param2=0(0),
param3=0(0)}
policer=
statistics={stat id 61 slice = 0 idx=18 entries=1}{Packets}
tcpdump
Enable a TCP dump for CPU-bound traffic on the Control and Router Processors..
C9000 Series
Syntax
tcpdump {cp | rp} [capture-duration time | filter expression | max-file-
count value | packet-count value | snap-length value | write-to path]
To disable the TCP dump, use the no tcpdump command.
Debugging and Diagnostics 613