Deployment Guide

stack-unit unit-number port-set port-pipe-id counters | linecard slot-id
port-set number }}
Parameters
eg-acl | in-acl Enter either the keyword eg-acl or the keyword in-acl to display ingress or
egress ACL data.
linecard slot-id Enter the linecard slot-id parameters to specify a line card. The range of
slot IDs is from 0 to 11.
pe pe-id Enter the pepe-id parameters to specify a port extender (PE). The PE ID range is
from 0 to 255.
NOTE: The pe option is only visible when the extended bridge feature is
enabled.
stack-unit unit-
number
Enter the stack-unitunit-number parameters to specify a stack-unit. The
stack-unit range is from 0 to 7.
port-set number Enter the keyword port-set number parameters to specify a port pipe (set of
ports) on a line card. The port set number is 0.
counters Enter the keyword counters to display counter statistics.
Defaults none
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
Usage
Information
The port-set values are internal port numbers.For more information on the interfaces and port numbers,
see the Debugging and Diagnostics chapter in the Dell Networking OS Configuration Guide for the C9000
System.
Example
Dell#show hardware mac in-acl pe 8 stack-unit 0 port-set 0
EID 0x00000c00: gid=0x5,
slice=6, slice_idx=0, part =0 prio=0xc00, flags=0x10602, Installed,
Enabled
tcam: color_indep=1024,
Stage
InPort
DATA=0x0000000000000000000000000000000000000000000000001000000000
MASK=0x00000000000000000000000000000000000000000000fdffffffffffff
InPorts
DATA=0x0000000000000000000000000000000000000000000000001000000000
MASK=0x00000000000000000000000000000000000000000000fdffffffffffff
HiGig
Offset: 320 Width: 1
DATA=0x00000000
MASK=0x00000001
SrcMac
Offset: 89 Width: 48
DATA=0x00000000 08000000
MASK=0x0000ffff ffffffff
action={act=CopyToCpuCancel, param0=0(0), param1=0(0), param2=0(0),
param3=0(0)}
610 Debugging and Diagnostics