Deployment Guide

Maximum Shared Limit: 4637
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
----- Buffer Stats for Interface PeGi 10/1/1 Queue 2 -----
Maximum Shared Limit: 4637
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
----- Buffer Stats for Interface PeGi 10/1/1 Queue 3 -----
Maximum Shared Limit: 4637
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
----- Buffer Stats for Interface PeGi 10/1/1 Queue 4 -----
Maximum Shared Limit: 4637
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
----- Buffer Stats for Interface PeGi 10/1/1 Queue 5 -----
Maximum Shared Limit: 4637
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
----- Buffer Stats for Interface PeGi 10/1/1 Queue 6 -----
Maximum Shared Limit: 4637
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
----- Buffer Stats for Interface PeGi 10/1/1 Queue 7 -----
Maximum Shared Limit: 4637
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
----- Buffer Stats for Interface PeGi 10/1/1 Queue 8 -----
Maximum Shared Limit: 4637
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
----- Buffer Stats for Interface PeGi 10/1/1 Queue 9 -----
Maximum Shared Limit: 4637
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
----- Buffer Stats for Interface PeGi 10/1/1 Queue 10 -----
Maximum Shared Limit: 4637
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
----- Buffer Stats for Interface PeGi 10/1/1 Queue 11 -----
Maximum Shared Limit: 4637
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
----- Buffer Stats for Interface PeGi 10/1/1 Queue 12 ----
Related
Commands
clear hardware system-flow — clears the statistics from selected hardware components.
show system — displays the current status of all the stack members or a specific member.
show hardware ip
Display Layer 3 ACL or QoS data for a line card and port pipe.
C9000 Series
Syntax
show hardware ip {eg-acl | in-acl | qos} linecard slot-id | pe pe-id stack-
unit unit-number port-set port-pipe
Parameters
eg-acl Enter the keyword eg-acl to display Layer 3 egress acl data.
in-acl Enter the keyword in-acl to display Layer 3 ingress acl data.
qos Enter the keyword qos to display QoS data.
linecard slot-id Enter the linecard slot-id parameters to specify a line card. The range of
slot IDs is from 0 to 11.
Debugging and Diagnostics 605