Deployment Guide

description (ACL VLAN Group)
Add a text description of an ACL VLAN group.
C9000 Series
Syntax
description text
Parameters
description Enter a text to identify the ACL VLAN group (80 characters maximum).
Default No default behavior or values
Command Modes ACL-VLAN-GROUP CONFIGURATION (conf-acl-vl-grp)
Command
History
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.0) Introduced on the Z9500.
9.3(0.0) Introduced on the S4810, S4820T, and Z9000.
Usage
Information
Enter a description for each ACL VLAN group that you create for effective administrative and logging
purposes.
ip access-group (ACL VLAN Group)
Apply an egress IP ACL to the ACL VLAN group.
C9000 Series
Syntax
ip access-group access-list-name out implicit-permit
Parameters
access-list-name Enter the name of the egress IP ACL to be applied to member interfaces of the
VLAN group (140 characters maximum).
out Enter the keyword out to apply the ACL to outgoing traffic.
implicit-permit
Enter the keyword implicit-permit to change the default action of the ACL
from implicit-deny to implicit-permit (that is, if the traffic does not match the
filters in the ACL, the traffic is permitted instead of dropped).
Default None
Command Modes ACL-VLAN-GROUP CONFIGURATION (conf-acl-vl-grp)
Command
History
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.0) Introduced on the Z9500.
9.3(0.0) Introduced on the S4810, S4820T, and Z9000.
Usage
Information
You can apply only an egress IP ACL on an ACL VLAN group.
256 Access Control Lists (ACL)