Deployment Guide

uploading pre-recorded traps(send count:3, pending traps:0) to CB
Jul 30 16:31:13: %PE255-UNIT1-S:CP %EVL-6-EVENT_LOGGING: Start uploading
pre-recorded traps(count:3) to CB
Jul 30 16:31:11: %PE255-C1048P:3 %IFAGT-5-STACK_PORT_LINK_UP: Changed
stack port state to up: 3/2
Jul 30 16:31:11: %PE255-C1048P:1 %IFAGT-5-STACK_PORT_LINK_UP: Changed
stack port state to up: 1/1
Jul 30 16:31:11: %PE-UNKN-UNIT1-S:CP %RAM-5-STACKUNIT_STATE: Stack-unit
1 is in Standby State.
Jul 30 16:31:06: %PE-UNKN-UNIT1-S:CP %POLLMGR-2-ALT_STACKUNIT_STATE:
Alternate Stack-unit is present
Jul 30 16:31:06: %PE-UNKN-UNIT1-U:CP %RAM-6-ELECTION_ROLE: Stack-unit 1
is transitioning to Standby Stack-unit.
Jul 30 16:31:06: %PE-UNKN-UNIT1-U:CP %IRC-6-IRC_COMMUP: Link to peer
Stack-unit is up
Dell#show logging 1
Syslog logging: enabled
Console logging: level debugging
Monitor logging: level debugging
Buffer logging: level debugging, 33 Messages Logged, Size (40960
bytes)
Trap logging: level informational
Jul 7 14:20:19: %PE1-UNIT1-M:CP %SEC-5-LOGIN_SUCCESS: Login successful
on console
show logging auditlog
Displays an audit log.
C9000 Series
Syntax
show logging auditlog
Defaults none
Command Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.5(0.1) Introduced on the Z9500.
9.5(0.0) Introduced on the S4810, S4820T, S6000, Z9000, and MXL.
Example
Dell(conf)#show logging audit
Related
Commands
clear logging auditlog — clears audit log.
Simple Network Management Protocol (SNMP) and Syslog 1641