Deployment Guide

Feb 18 00:45:40: %SYSTEM:CP %SEC-3-AUTHENTICATION_ENABLE_SUCCESS: Enable
password authentication success on vty0 ( 10.16.127.145 )
Feb 18 00:45:40: %SYSTEM:CP %SEC-5-LOGIN_SUCCESS: Login successful for
user admin on line vty0 ( 10.16.127.145 )
Feb 18 00:43:10: %SYSTEM:CP %SEC-5-LOGOUT: Exec session is terminated
for user admin on line vty0 ( 10.16.127.145 )
Feb 18 00:43:10: %SYSTEM:CP %IFMGR-5-ASTATE_DN: Changed interface Admin
state to down: Fo 2/0
Feb 18 00:43:07: %SYSTEM:CP %SYS-5-CONFIG_I: Configured from vty0 (
10.16.127.145 )by admin
- repeated 6 times
Feb 18 00:42:44: %SYSTEM:CP %SYS-5-CONFIG_I: Configured from vty0 (
10.16.127.145 )by admin
Feb 18 00:42:44: %SYSTEM:CP %IFMGR-5-ASTATE_UP: Changed interface Admin
state to up: Fo 2/0
Feb 18 00:42:38: %SYSTEM:CP %SEC-3-AUTHENTICATION_ENABLE_SUCCESS: Enable
password authentication success on vty0 ( 10.16.127.145 )
Feb 18 00:42:38: %SYSTEM:CP %SEC-5-LOGIN_SUCCESS: Login successful for
user admin on line vty0 ( 10.16.127.145 )
Feb 18 00:39:38: %SYSTEM:CP %SYS-5-CONFIG_I: Configured from console
--More--
Example
(History)
Dell#show logging history
Syslog History Table: 1 maximum table entries,
saving level warnings or higher
SNMP notifications not Enabled
Feb 18 01:16:57: %SYSTEM:CP %SEC-3-AUTHENTICATION_ENABLE_SUCCESS: Enable
password authentication success on vty0 ( 10.16.127.145 )
Example (PE
Console)
Dell#show logging
Syslog logging: enabled
Console logging: level debugging
Monitor logging: level debugging
Buffer logging: level debugging, 60 Messages Logged, Size (40960
bytes)
Trap logging: level informational
Jul 30 16:34:27: %PE255-UNIT1-M:CP %CHMGR-4-TEMP_STATUS_CHANGE: Unit 3
temperature state changed to 1 (Current temperature 39C).
Jul 30 16:34:27: %PE-UNKN-C1048P:3 %CHMGR-2-FAN_SPEED_CHANGE: Fan speed
changed to 75 % of the full speed
Jul 30 16:34:26: %PE-UNKN-C1048P:3 %CHMGR-2-FAN_SPEED_CHANGE: Fan speed
changed to 60 % of the full speed
Jul 30 16:34:26: %PE255-UNIT1-M:CP %CHMGR-5-FANTRAY_INSERTED: Fan tray 0
of Unit 3 is inserted
Jul 30 16:34:26: %PE-UNKN-C1048P:3 %CHMGR-2-FAN_SPEED_CHANGE: Fan speed
changed to 60 % of the full speed
Jul 30 16:34:26: %PE255-UNIT1-M:CP %CHMGR-0-PS_DOWN: Major alarm: Power
supply 1 in unit 3 is down
Jul 30 16:34:26: %PE255-UNIT1-M:CP %CHMGR-5-PEM_INSERTED: Power entry
module 1 of unit 3 is inserted
Jul 30 16:34:26: %PE255-UNIT1-M:CP %CHMGR-0-PS_UP: Power supply 0 in
unit 3 is up
Jul 30 16:34:26: %PE255-UNIT1-M:CP %CHMGR-5-PEM_INSERTED: Power entry
module 0 of unit 3 is inserted
Jul 30 16:34:25: %PE-UNKN-C1048P:3 %IFAGT-5-INSERT_OPTICS_PLUS: Optics
SFP+ inserted in slot 3 port 1
Jul 30 16:34:24: %PE255-UNIT1-M:CP %IFMGR-5-OSTATE_UP: Changed interface
state to up: Te 3/1
Jul 30 16:34:24: %PE-UNKN-C1048P:3 %IFAGT-5-STACK_PORT_LINK_UP: Changed
stack port state to up: 3/2
Jul 30 16:34:24: %PE-UNKN-C1048P:3 %IFAGT-5-STACK_PORT_LINK_UP: Changed
stack port state to up: 3/1
Jul 30 16:34:23: %PE255-UNIT1-M:CP %CHMGR-5-STACKUNIT_UP: stack-unit 3
is up
Jul 30 16:34:23: %PE255-UNIT1-M:CP %CHMGR-5-CHECKIN: Checkin from stack-
unit 3 (type C1048P, 52 ports)
Jul 30 16:34:20: %PE255-UNIT1-M:CP %CHMGR-5-STACKUNIT_DETECTED: stack-
unit 3 present
Simple Network Management Protocol (SNMP) and Syslog
1639