Deployment Guide

reverse (OPTIONAL) Enter the keyword reverse to view the Syslog messages in FIFO
(first in, first out) order.
summary (OPTIONAL) Enter the keyword summary to view a table showing the number of
messages per type and per slot. Slots *7* and *8* represent RPMs.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010 and C1048P.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
Example (Partial)
Dell#show logging
Syslog logging: enabled
Console logging: level debugging
Monitor logging: level debugging
Buffer logging: level debugging, 97 Messages Logged, Size (40960
bytes)
Trap logging: level informational
Logging to 172.16.1.162
Logging to 10.10.10.4
Logging to 10.1.2.4
Logging to 172.31.1.4
Logging to 133.33.33.4
Feb 18 01:17:32: %SYSTEM:CP %SEC-5-LOGOUT: Exec session is terminated
for user admin on line vty0 ( 10.16.127.145 )
Feb 18 01:17:31: %SYSTEM:CP %IFMGR-5-ASTATE_DN: Changed interface Admin
state to down: Fo 2/0
Feb 18 01:17:24: %SYSTEM:CP %SEC-5-LOGIN_SUCCESS: Login successful for
user admin on line vty0 ( 10.16.127.145 )
Feb 18 01:17:23: %SYSTEM:CP %SEC-5-LOGOUT: Exec session is terminated
for user admin on line vty0 ( 10.16.127.145 )
Feb 18 01:17:03: %SYSTEM:CP %SYS-5-CONFIG_I: Configured from vty0 (
10.16.127.145 )by admin
Feb 18 01:17:03: %SYSTEM:CP %IFMGR-5-ASTATE_UP: Changed interface Admin
state to up: Fo 2/0
Feb 18 01:16:57: %SYSTEM:CP %SEC-3-AUTHENTICATION_ENABLE_SUCCESS: Enable
password authentication success on vty0 ( 10.16.127.145 )
Feb 18 01:16:57: %SYSTEM:CP %SEC-5-LOGIN_SUCCESS: Login successful for
user admin on line vty0 ( 10.16.127.145 )
Feb 18 00:46:18: %SYSTEM:CP %SEC-5-LOGOUT: Exec session is terminated
for user admin on line vty0 ( 10.16.127.145 )
Feb 18 00:46:17: %SYSTEM:CP %SYS-5-CONFIG_I: Configured from vty0 (
10.16.127.145 )by admin
- repeated 11 times
Feb 18 00:46:17: %SYSTEM:CP %IFMGR-5-ASTATE_DN: Changed interface Admin
state to down: Fo 2/0
Feb 18 00:45:46: %SYSTEM:CP %SYS-5-CONFIG_I: Configured from vty0 (
10.16.127.145 )by admin
- repeated 6 times
Feb 18 00:45:46: %SYSTEM:CP %IFMGR-5-ASTATE_UP: Changed interface Admin
state to up: Fo 2/0
1638
Simple Network Management Protocol (SNMP) and Syslog