Deployment Guide

Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
snmp-server context
Configure a new context string for SNMP (SNMPv3) server.
C9000 Series
Syntax
snmp-server context {line}
To remove a user from the SNMP group, use the no snmp-server context {line} command.
Parameters
line Enter the context string (max 32 characters), on the host that connects to the
agent.
Defaults NONE.
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0)
Introduced on the C9010.
Usage
Information
Example
Dell(conf)#snmp-server context line
Related
Commands
show snmp user — displays the information configured on each SNMP user name.
snmp-server community
Configure a new community string access for SNMPv1 v2 and v3.
C9000 Series
Syntax
snmp-server community community-name {ro | rw} [ipv6 ipv6-access-list-
name [ipv6 ipv6-access-list-name | access-list-name | security-name name]
| security-name name [ipv6 ipv6-access-list-name | access-list-name |
security-name name] | access-list-name [ipv6 ipv6-access-list-name |
access-list-name | security-name name]]]
Simple Network Management Protocol (SNMP) and Syslog 1609